Buying a Graphic Hoodie That Fits Your Brief

The artwork gets your attention. Before you order a graphic hoodie, though, I want you to have a clear answer to three questions: what size information is available, what garment the design is printed on, and where that print sits.

A picture can help you choose a design, but it cannot settle all three. Nor can a familiar size letter. For this guide, I’m using four of our current back-printed hoodies to show you what to look for on a product page and where you should stop and ask for clarification.

Those examples are 8 Ball Versus 9 Ball, Flaming 8 Ball Pool Table, 8 Ball Pool Table and Smoking 8 Ball. The product details discussed here were checked on 22 September 2026. When you’re ready to order, use the current product page and size guide, because those are the details your decision needs to rest on.

Check the live size table before choosing a size

I’d start with the 8Ball size guide, keeping the product page open alongside it. The four hoodies covered here currently have size options from Small to 5XL. That tells you which sizes are listed; it does not tell you which one will fit you.

Our current size guide has three column headings: Chest Size, Chest Width and Length. Read each heading with its entry rather than treating every chest figure as interchangeable. I wouldn’t turn one column into another or supply a measurement method that the guide itself does not explain.

There is a detail I need to make explicit: the current XL entry under Chest Size reads 48/48. That is what the table says. I’m leaving it visible here rather than quietly changing it into a different range or deciding what it was meant to say.

If that entry affects your choice, ask for clarification before ordering. A guess from me would still be a guess, even if it looked tidier in an article. The useful question is specific: “The XL Chest Size entry says 48/48. Can you confirm that entry and explain how the measurements are taken?”

The measurement method matters elsewhere in the table too. The guide does not explain whether its labels refer to body or garment measurements, or how those measurements are taken. I can point you to the labels, but I cannot honestly add tape-placement instructions to them.

For the same reason, I’m not going to tell you to order your usual size or automatically go up one. Neither instruction follows from the information available here. “Unisex” appears in these product descriptions, but it does not resolve a question about the size table.

My first check is complete when you’ve found the size option you’re considering, read the relevant entries under their actual headings and resolved anything unclear. If you cannot explain why you’re choosing that size without filling in a missing detail yourself, leave the decision open until you have an answer.

Read the garment specification behind the artwork

Next, I’d move from the size selector to the written product description. For these four hoodies, the verified specification is 80% ringspun cotton, 20% polyester and 280gsm. Their descriptions also identify DTG printing. Those are concrete details you can look for rather than relying on a broad claim about quality.

You can start with the 8 Ball Versus 9 Ball Back Printed Hoodie and read its garment information alongside the design. When you open another product, repeat the check on that product’s own page. I wouldn’t carry a specification across just because two hoodies appear together in a collection.

There is a distinction in the garment naming across these examples. Three descriptions specify AWDIS JH001; the fourth identifies the garment as AWDIS unisex without that model code. I would keep that difference intact. A less detailed description is a reason to clarify the model if it matters to you, not permission to add JH001 yourself.

For a straightforward comparison, I’d note the garment name as written, the fibre percentages, the stated 280gsm weight and the print method. That gives you a short set of details to check against each page. If one page leaves something out, mark it as unanswered rather than borrowing the answer from its neighbour.

I’d also separate what a specification tells you from what you hope the hoodie will do. These details do not establish how it will fit you, how it will retain its shape or how the print will look after repeated washing. I’m not attaching those promises to a fabric blend or a printing method.

Care wording needs the same attention. The descriptions for the Flaming 8 Ball Pool Table Back Printed Hoodie and the Smoking 8 Ball Back Printed Hoodie say machine washable. They do not supply a washing temperature or a drying or ironing method in the evidence used here.

I’d take “machine washable” as the information it gives, then check the garment’s care instructions for the method. If you need that information before buying, ask for it. This article should help you read a product page accurately, so I’m not going to turn a short care statement into a complete washing routine.

Make sure the print sits where you want it

The third check is easy to overlook when the design has already won you over: look at which side of the hoodie carries it. All four examples here are described as large or full back-print unisex hoodies. The position is part of what you’re choosing.

Take the 8 Ball Pool Table Back Printed Hoodie. “Back Printed” belongs to the product name because it tells you where the graphic sits. Read that wording alongside the product image, rather than concentrating only on the artwork itself.

I’d look at the whole garment view first, then the design detail. That order keeps the placement in view while you decide whether you like the graphic. A close look at the artwork answers one question; seeing it on the back of the hoodie answers another.

Think about how you intend to wear it, too. If the design needs to be visible from the front for what you have in mind, a back print does not meet that brief. If you plan to wear something over it, consider whether the back artwork will be covered. That is a practical choice you can make before ordering.

The current colour options for these four products are Black, Burgundy, Heather Grey and Navy. Before adding your choice to the basket, check the selected colour and size as well as the product name. Keep the garment choice and the design placement in the same decision.

My final pass would be three questions: have I understood the live size information, have I read this hoodie’s actual garment specification, and have I confirmed that I want the graphic on the back? Any unresolved entry, including that XL 48/48 figure, stays a question until it is clarified.

You can use those checks as you browse our Back Printed Hoodies collection. Choose the artwork you want, then give the garment details the same attention. I want the hoodie you order to match a decision you could make clearly from the information in front of you.